 |
loading
VOE 11417126
| Availability: | |
|---|---|
| Item | Specification |
|---|---|
| Part Number | 20AML (also VOE 11417129) |
| Product Name | Loader Abrasion Resistant Tooth |
| Product Type | Wheel Loader Bucket Tooth / Ground Engaging Tool (GET) |
| Compatible Machine Models | Volvo L180 Series Wheel Loader |
| Application | Abrasive material handling and high-wear conditions |
| Design | Abrasion Material Loader (AML) |
| Single Weight | 6.1 kgs (13.4 lbs) |
| Material | High-hardness, abrasion-resistant alloy steel (~500 HB) |
| Compatible Adapter System | Volvo 20 Series |
| Compatible Pin | 20P (Locking pin for secure attachment) |
| Industry Focus | Aggregate handling, Sand and gravel, Quarrying, Construction, Recycling |
| OEM Interchangeability | Direct replacement for Volvo OEM tooth |
Volvo 20AML bucket tooth
VOE 11417129 abrasion tooth
L180 wheel loader bucket teeth
20 series Volvo AML tooth
6.1 kg loader tooth
Replacement tooth for Volvo L180 loader
20P locking pin for Volvo tooth
Volvo abrasion resistant bucket tooth L180
20AML loader abrasion teeth
The Volvo 20AML Loader Abrasion Resistant Tooth (Part No. VOE 11417129) is a genuine OEM-specification ground engaging tool designed specifically for the Volvo L180 series wheel loaders. Engineered as part of the Volvo 20 Series tooth system, this AML (Abrasion Material Loader) tooth is optimized for handling highly abrasive materials such as sand, gravel, crushed stone, and recycled aggregates.
The AML profile features enhanced wear material in high-abrasion areas, providing extended service life compared to standard GPL (General Purpose Loader) teeth in abrasive applications. This tooth is specifically designed for operators who work primarily in sandy, granular, or highly abrasive conditions where wear resistance is the primary concern.
| Feature | Benefit |
|---|---|
| Abrasion Material Loader (AML) Profile | Optimized for highly abrasive materials: sand, gravel, crushed stone, recycled aggregates |
| Enhanced Wear Material | Extra thickness in high-abrasion areas for extended service life |
| High-Hardness Alloy Steel (~500 HB) | Excellent wear resistance in sandy and granular materials |
| Volvo 20 Series System | Perfect fit and maximum performance with Volvo adapters |
| Strategically Placed Wear Material | Concentrates abrasion-resistant steel in critical wear zones |
| Compatible with 20P Locking Pin | Easy, hammer-less installation with Volvo's vertical locking device |
| Self-Sharpening Design | Maintains penetration capability throughout the life of the tooth |
| Equipment Class | Typical Applications |
|---|---|
| Volvo L180 Wheel Loader | Sand and gravel handling, quarry support, aggregate loading |
| Heavy Construction | Foundation work, granular fill, site preparation |
| Recycling | Crushed concrete, asphalt millings, recycled aggregate |
| General Applications | Abrasive material loading, stockpile reclamation |
The 20AML tooth is specifically matched to Volvo L180 series wheel loaders, including:
Volvo L180 (Base model)
Volvo L180C
Volvo L180D
Volvo L180E
Volvo L180F
Volvo L180G
Volvo L180H
The L180 series features an operating weight of approximately 19,500–23,000 kg with bucket capacities ranging from 3.0 m³ to 5.5 m³ depending on configuration.
| Condition | Recommended Tooth |
|---|---|
| Highly abrasive materials (sand, gravel, crushed stone) | 20AML |
| Mixed materials with moderate abrasion | 20GPL |
| General purpose with minimal abrasion | 20GPL |
| Rock and impact applications | 20AMRL |
Adapter Compatibility: Install on Volvo 20 Series adapter only
Pin Installation: Use correct 20P locking pin; vertical locking device enables fast, hammerless installation
Regular Inspection: Check tooth wear periodically; replace when significant wear occurs
Application Selection: For general purpose applications with less abrasion, consider 20GPL
Complete System: Replace all teeth as a set for even wear and consistent bucket fill
| Comparison | 20AML vs 20GPL |
|---|---|
| Wear Resistance | Higher (optimized for abrasion) |
| Penetration | Good (slightly less than GPL) |
| Best Application | Sand, gravel, crushed stone |
| Service Life | Longer in abrasive conditions |
Extended Wear Life: Up to 30-50% longer life than GPL teeth in highly abrasive materials
Volvo Genuine Quality: Manufactured to exact OEM specifications for perfect fit and performance
Cost-Effective: Reduced downtime and lower operating costs in abrasive applications
Versatile Compatibility: Fits all Volvo 20 Series adapters across L180 models
| Item | Detail |
|---|---|
| Part Number | 20AML / VOE 11417129 |
| Type | Abrasion Material Loader (AML) |
| Series | 20 Series Volvo Tooth System |
| Weight | 6.1 kg per piece |
| Pin Required | 20P (order separately) |
| Packaging | Individual pieces or bulk |
Note: Must be used with Volvo 20 Series adapter and 20P locking pin. For general purpose applications in non-abrasive materials, consider 20GPL teeth. For rock applications, consider 20AMRL. Always replace the retaining pin when installing new teeth for optimal retention and safety.
