Views: 0 Author: Site Editor Publish Time: 2026-08-27 Origin: Site
Cast End Bits for Mining Dozers
For mining and heavy-duty dozing applications, end bits are critical wear components on the cutting edge of a dozer blade. Beneparts Mining supplies cast end bits for demanding ground conditions, with a focus on heavy-duty applications and replacement compatibility.
Why Choose Cast End Bits?
Cast end bits are an option for mining and heavy-duty dozer applications where wear resistance, section strength and consistent geometry are important. Compared with end bits made by cutting and forming plate, cast components can be produced with dedicated wear-part geometry suited to the intended application.
For operations running large dozers, the correct end bit should be selected according to machine model, blade configuration, part number, ground conditions and the customer's wear pattern.
Mining Dozer Applications
Beneparts cast end bits can be developed and supplied for heavy-duty dozer applications, including Caterpillar D7 and larger models where applicable. Actual fitment should be confirmed against the machine model, blade configuration and required part number before ordering.
Cast End Bit vs. Plate-Cut / Fabricated End Bit
Item | Cast End Bit | Plate-Cut / Fabricated End Bit |
Manufacturing | Cast to the required geometry | Cut and fabricated from plate |
Geometry | Dedicated cast wear-part geometry | Depends on plate thickness and fabrication |
Application | Heavy-duty wear applications | General and selected heavy-duty applications |
Selection | Machine / blade / part number based | Machine / blade / dimensions based |
HC (Hot Cupped) End Bit Part Number Reference
The following references are taken from the supplied D7-and-above dozer reference sheet. They are reference information and should be verified against the customer's exact blade and machine configuration before quotation.
Part Number | Side | Type | Weight | Referenced Models |
4J8843 / 4J8844 | RH / LH | GD | 59.9 lb (27.2 kg) | D7G, D7H/R, D7S, D7GS, D7H/R S, D7H/R SU and other D7/D8 configurations shown in source |
4J8843HD / 4J8844HD | RH / LH | EWL | 80.5 lb (36.5 kg) | D7G, D7H/R and other referenced D7/D8 configurations shown in source |
8E4193 / 8E4194 | RH / LH | GD | 109.8 lb (49.8 kg) | D8N/R/T, D8N/R/T SU and referenced D8/D9 configurations shown in source |
8E4537 / 8E4538 | RH / LH | EWL | 119.9 lb (54.4 kg) | D8N/R/T, D8N/R/T SU and referenced D8/D9 configurations shown in source |
9J1477 / 9J1478 | RH / LH | GD | 59.4 lb (26.9 kg) | D8K, D8L and referenced configurations shown in source |
8E4197 / 8E4196 | RH / LH | GD | 111.1 lb (50.4 kg) | D8L, D8N/R/T, D9G/H/N/R/T and referenced configurations shown in source |
8E4539 / 8E4540 | RH / LH | EWL | 165.1 lb (74.9 kg) | D8L, D8N/R/T, D9G/H/N/R/T and referenced configurations shown in source |
8E4199 / 8E4198 | RH / LH | GD | 197.3 lb (89.5 kg) | D9G/H/N/R/T, D9L, D10N/R/T and referenced configurations shown in source |
8E4541 / 8E4542 | RH / LH | EWL | 273.4 lb (124.0 kg) | D9G/H/N/R/T, D9L, D10N/R/T and referenced configurations shown in source |
2755941 / 2755942 | RH / LH | EWL | 302.0 lb (137.0 kg) | D9L, D10N/R/T and referenced configurations shown in source |
8E4543 / 8E4544 | RH / LH | GD | 348.3 lb (158.0 kg) | D10 SU and referenced configurations shown in source |
8E4545 / 8E4546 | RH / LH | EWL | 370.4 lb (168.0 kg) | D10 SU, D10 U, D11N/R SU and referenced configurations shown in source |
2755445 / 2755446 | RH / LH | EWL | 472.2 lb (214.2 kg) | D10 U and D11N/R U and referenced configurations shown in source |
Important: the supplied reference sheet contains additional fitment details. Confirm the exact part number and machine configuration with the customer before production or quotation.
How to Select the Right Cast End Bit
1. Confirm the dozer manufacturer and machine model.
2. Confirm the blade type and configuration.
3. Provide the existing end bit part number where available.
4. Check RH / LH position and mounting dimensions.
5. Review the working conditions and wear pattern.
6. Confirm material / hardness and application requirements.
7. Provide photos or drawings when fitment is uncertain.
Beneparts Cast End Bit Solution
Beneparts Mining focuses on replacement wear parts for mining and heavy-duty equipment. For cast end bits, customers can provide the machine model, existing part number, photos, dimensions or drawings and operating conditions. This information can be used to confirm the required configuration before quotation and production.
Related Dozer Wear Parts
Depending on the machine and blade configuration, related wear components may include cutting edges, corner bits, bolt-on edges, ripper components and other dozer GET parts.
Request a Cast End Bit Quote
Looking for cast end bits for a Caterpillar D7 or larger mining dozer? Send us your machine model, part number and photos of the existing component. Beneparts Mining can review the application and provide a replacement wear-part solution.